城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

拱形抗滑桩墙支护结构体系模型试验相似材料研制

根据模型试验相似比尺和桩土间应力协调要求,用机制砂、河砂、水泥、石粉等配置了40组(每组6个)低强度、低弹性模量的圆柱形微混凝土相似材料试件.测试结果表明:微混凝土具有和原型混凝土大致相同的应力应变阶段和破坏模式,可以模拟原型结构的力学行为和变形、破坏特征.砂率和石粉取代率不同时,微混凝土试件的轴压强度和弹性模量在较大...     

Potential effects of particulate matter from combustion during services on human health and on works of art in medieval churches in Cyprus

Indoor and outdoor particulate matter (PM_0.3-10) number concentrations were established in two medieval churches in Cyprus. In both churches incense was burnt occasionally during Mass. The highest indoor PM_0.5-1 concentrations compared with outdoors (10.7 times higher) were observed in the church that burning of candles indoors was allowed. Peak indoor black carbon concentration was 6.8 μg m⁻³ in the instances that incense was burning and 13.4 μg m⁻³ in the instances that the candles were burning (outdoor levels ranged between 0.6 and 1.3 μg m⁻³). From the water soluble inorganic components determined in PM₁₀, calcium prevailed in all samples indoors or outdoors, whilst high potassium concentration indoors were a clear marker of combustion. Indoor sources of PM were clearly identified and their emission strengths were estimated via modeling of the results. Indoor estimated PM_0.3-10 mass concentrations exceeded air quality standards for human health protection and for the preservation of works of art.     

Use of recycled fine aggregate in concretes with durable requirements

The use of construction waste materials as aggregates for concrete production is highly attractive compared to the use of non-renewable natural resources, promoting environmental protection and allowing the development of a new raw material. Several countries have recommendations for the use of recycled coarse aggregate in structural concrete, whereas the use of the fine fraction is limited because it may produce significant changes in some properties of concrete. However, during the last decade the use of recycled fine aggregates (RFA) has achieved a great international interest, mainly because of economic implications related to the shortage of natural sands suitable for the production of concrete, besides to allow an integral use of this type of waste. In this study, the durable behaviour of structural concretes made with different percentage of RFA (0%, 20%, and 30%) is evaluated. Different properties related to the durability of concretes such as absorption, sorptivity, water penetration under pressure, and carbonation are determined. In addition, the results of compressive strength, static modulus of elasticity and drying shrinkage are presented. The obtained results indicate that the recycled concretes have a suitable resistant and durable behaviour, according to the limits indicated by different international codes for structural concrete.     

Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum

Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.     

Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

高铝粉煤灰提取氧化铝后硅钙渣用作水泥混合材

为了使高铝粉煤灰提取氧化铝后所产生的硅钙渣被大量的用作水泥混合材,通过水泥强度、水化放热和干缩性实验研究了原状硅钙渣和脱碱硅钙渣对水泥强度和稳定性的影响。结果表明,当硅钙渣掺量达30%时,硅钙渣水泥强度仍可满足P·C 32.5水泥要求。且随硅钙渣掺入量的增加,水泥早期水化放热速率增加的同时水泥累计水化放热量和干缩率还会显著降低。与原状硅钙渣相比,在同等掺量的情况下,脱碱硅钙渣更有利于保持水泥强度,降低其水化热和改善干缩性。     

消防射水与自然冷却下玻璃纤维对灾后混凝土性能影响

本文对火灾后消防射水对玻璃纤维改性混凝土(GF-1)剩余抗压强度的影响进行了研究。分析了GF-1在不同温度、不同冷却方式条件下抗压强度的变化规律,并利用ORIGIN7.5软件拟合了高温作用后GF-1剩余抗压强度与温度之间的关系。研究得出:在两种冷却条件下,二种配比的HPC在高温后剩余抗压强度均呈持续降低,消防射水冷却条件下HPC的剩余抗压强度降低速率大;加热到900℃时,消防射水冷却条件下HPC的剩余抗压强度最低;消防射水对高温作用后GF-1的剩余强度影响很大,射水冷却后GF-1剩余强度明显低于自然冷却的剩余强度;且随着破坏温度升高,经消防射水冷却的GF-1剩余抗压强度呈衰减状态,;GF-1在射水冷却下强度变化没有NC-1快速,与自然冷却条件下的强度变化相比,也呈现出不同的衰减规律;并建立了自然冷却条件下及消防射水冷却条件下GF-1剩余强度与火场温度之间的多阶多项式拟合式。     

钢渣掺量对泡沫混凝土砌块性能的影响

泡沫混凝土是一种环保、节能的保温隔热材料，以其优良的保温性能，受到越来越多研究者的关注。对钢渣的特性进行了分析测试，对钢渣不同掺量对泡沫混凝土砌块特性的影响进行了研究，结果表明，采用添加5％～35％钢渣所制备的钢渣泡沫混凝土砌块，其密度等级为JC／T1062—2007中的B10级，掺人5％、15％钢渣的泡沫混凝土抗压强度达到A3．5等级，掺人25％、35％钢渣的泡沫混凝土抗压强度达到A2．5等级。随着钢渣掺量的增大，抗压强度、抗折强度降低，吸水率增大。在同一钢渣掺量的情况下，泡沫混凝土砌块的抗压强度变化率增加显著，而且随着钢渣的加入量升高而增大。钢渣的加入有利于提高泡沫混凝土砌块的后期抗压强度。     

林聪悟-直线法在基于美国混凝土规范设计中的程序实现

首先,阐述了美国ACI318-08规范中钢筋混凝土受弯、受压构件的设计原理和基本假定。与我国混凝土结构设计规范不同,ACI318-08规范是根据构件的受力破坏形态来确定名义抗压和抗弯承载力的折减系数的,相对于延性破坏,脆性破坏构件的承载力折减较多。然后,由平衡条件、平截面假定及Newton迭代格式,推导出林聪悟-直线法的计算公式。编制程序实现该算法时,须根据最大、最小配筋率的规定对迭代区域进行限定;在确定P-M相关曲线上的拐点位置的基础上,实现中性轴高度在曲线上的分段迭代。通过在曲线拐点处设置微小增量及自动调整中性轴高度等方法,解决了程序计算时可能出现的迭代发散问题。算例表明,所编制程序的计算结果具有很高的精度。